Skip to main content
+84 256 3892 619
VN EN
Industrial LPG: applications, choosing 12 kg or 45 kg cylinders and safe use
Industrial gas knowledge

Industrial LPG: applications, choosing 12 kg or 45 kg cylinders and safe use

INSECO About 2 min read

LPG is a familiar fuel for kilns, dryers, boilers and forklifts. This article covers the properties of LPG, how to choose between 12 kg and 45 kg cylinders and the key safety rules for using gas in a workshop.

LPG (liquefied petroleum gas) is a mixture consisting mainly of propane and butane. Under moderate pressure it turns into a liquid, so a large amount can be stored in a steel cylinder; when the valve is opened, the liquid vaporises into gas for burning. LPG is heavier than air and naturally odourless, so producers add a distinctive odorant to make leaks easy to detect.

Applications in production

  • Fuel for industrial kilns, dryers and boilers.
  • Welding, cutting and heating metals (mixed with oxygen).
  • Fuel for forklifts operating in workshops and warehouses.
  • Heating and drying in food and agricultural processing.

Choosing 12 kg or 45 kg cylinders

  • 12 kg cylinders: compact and easy to move, suitable for small demand, equipment in several locations or occasional use.
  • 45 kg cylinders: last longer and reduce cylinder changes, suitable for kilns, dryers and industrial kitchens running continuously.
  • For high consumption, several 45 kg cylinders can be connected through a changeover manifold for a continuous gas supply.

Safety rules for use

  • Keep cylinders upright in a ventilated place away from sunlight and heat sources; never lay a cylinder down or turn it upside down to get more gas.
  • Do not store in basements or low-lying areas, as leaking gas will collect there.
  • Keep away from oxygen cylinders.
  • Use the correct type of pressure regulator and hose, and replace hoses periodically.
  • Check for leaks with soapy water at the valve, hose and joints; never use a flame to test.
  • Close the cylinder valve when not in use.

If you smell gas

  • Close the cylinder valve immediately if it is safe to reach.
  • Open doors for ventilation; do not switch electrical switches on or off, and do not use phones or any device that could cause a spark in the area.
  • Move everyone out of the area and contact your supplier for an inspection before using the gas again.

INSECO supplies LPG in 12 kg and 45 kg cylinders to factories and businesses in Quy Nhon and Central Vietnam. Call our hotline +84 256 3892 619 for advice on the right cylinders and layout.

Related product
LPG
Share this article: Facebook

Need advice on industrial or medical gases?

The INSECO technical team is ready to help and provide a quick quotation.

Call now

Related articles

ZALO Chat on Zalo Call +84 256 3892 619